Latent Print Backing Cards - 8½" x 11" White Single Sheets
Preserve and Document Latent Prints
White Glossy Side of Cards is for Mounting of Latent Prints
White Non-Glossy Side is Blank
Size: 8½" x 11"
250 Sheets in One Package
Price is Per Package
Latent Print Backing Cards - Black
Preserve and Document Latent Prints
Black Glossy Side of Cards is for Mounting of Latent Prints
White Backing on Cards
Cards are Loose (Unbound)
Size: 3" x 5"
100/pk
100 Cards Per Pack
Large Lift Cards - 8 1/2" x 11"
For Use With Large Clear Adhesive Sheets
Large Enough for Shoe and Tire Prints
Attach Lift Sheet to Glossy Side of Card
Non-Glossy Side of Card Can be Used for Sketches and Notes
100 Sheets
large latent lift cards
1 1/2" Round Fingerprint Pad
Approved By All government Agencies - High Quality Fingerprint Pads
Less ink pads are considered to be "inkless". They leave a crisp, clear imprint, never smear, dry instantly, and leave no ink on fingers. Specially formulated ink does not dry out if pad is left open. Used by banks, notaries, and some law enforcement agencies. May have to be enhanced to satisfy FBI requirements.
Dark Ink pads are for law enforcement use. The dark ink gives very clear, crisp imprints, leaves very little residue on fingers, dries instantly, and does not smear.
Ceramic is the premium pad surface. We have the finest ceramic pads in the industry. Buy porous plastic for top economy.
1200 Imprints Per Pad
Corresponds to SKU #1-4500-P, #1-4500-C, #1-4501-P, and #1-4501-C in printed catalog, ink pad
New Basic Black Latent Print Kit
Kit Contents:
25 Latent Print Cards
1 Camel Hair Fingerprint Brush (if you pick #1-4261)
1 2" x 6" Lifting Tape
1 1 oz. Black Fingerprint Powder in 2 oz Jar
1 Sturdy Cardboard Case
1 Latent Plus Brush (only if you pick #1-4261-P in drop down menu below)
fingerprint kit, basic fingerprint kit, 1-4261-P
Handiprint Handiprint System for Positive Identification - 8" x 8" & 9.5" x 13½"
Use for Major Case Prints, Prints at Autopsy, Shoe and Tire Prints
Excellent for Autopsy Handprints
Tireprint Comparison Standards
Finger and Palm Prints
Shoeprint Comparison Standards
Lifting Latent Shoeprints
Multipurpose
Handiprint material is a flexible, very slightly elastic plastic. It is white in color and has an exceptiionally smooth, adhesive coating. It has distinct advantages for handprinting over ink methods because it will often conform to the curves of the palm with minimal slippage.
Process:
Lightly dust palm side of hand with black fingerprint powder.
Separate release paper from handiprint lifter material (HLM). Spread fingers and press hand on adhesive side of HLM.
Lift hand. HLM will adhere. Press HLM in center of palm, along length of each finger, and around the sides of fingertips. Press around thumb as much as possible.
Lightly redust thumb. Roll thumb on the HLM as you would for an inked print. Cover HLM with a piece of clear plastic. Write identifying information on back of HLM.
White Adhesive Lifters With Matched Clear Polyester Covers
(Corresponds to SKU #2-3005, #2-3015 in printed catalog, )
Handiprint, white adhesive lifters, fingerprint, foot print, tireprint, post mortem print, handyprint, handi print, white adhesive, handy print
Latent Lift Cards - White
Preserve and Document Latent Prints
White Glossy Side of Cards is for Mounting of Latent Prints
White Non-Glossy Side Features Pre-Printed Form for Recording Latent Print Information
Cards are Bound Into Easy-to-Use Pads of 50
Size: 3½" x 5"
Quantity Discounts at 10 and 50 Pads
fingerprint card, fingerprint cards
Basic Latent Print Kit
The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic™ fingerprint powder are held in a fitted insert. This kit includes the standard Zephyr® Fiberglass Brush. Secure storage and easy to carry.
Contains:
Bi-Chromatic Powder, (2oz.);
Zephyr Brush
Clear Lifting Tape, (1 1/2in x 360in)
White Backing Cards, Pack of 100
Large Box Container, 12.125" x 7.25" x 4.5"
Fitted Compartmentalized Insert
latent print, fingerprint kit, 1003903