Large Clear Adhesive Lift Sheets 9 1/2" x 13½"
Finger and Palm Prints
Shoe and Tire Prints
Better than Tape for Large Lifts
Peel Protective Backing and use Adhesive Lift, Like Tape
Cover with Clear Overlay Sheet (See Clear Overlay Sheets)
Transparent
Corresponds to SKUs, 2-6010, 2-6003, 2-6025 in printed catalog, clear adhesive sheet, adhesive polyester sheet, clear adhesive, clear lifter
Clear Adhesive Lift Sheets 8" x 8", Pk/100
Finger and Palm Prints
Better than Tape for Large Lifts
Peel Protective Backing and use Adhesive Lift, Like Tape
Cover with Clear Overlay Sheet (See Clear Overlay Sheets)
Transparent
Corresponds to SKUs #2-4010 #2-4050 #2-4250 in printed catalog, clear adhesive sheet, adhesive polyester sheet, clear adhesive, clear lifter, clearance, sale
Handiprint Handiprint System for Positive Identification - 8" x 8" & 9.5" x 13½"
Use for Major Case Prints, Prints at Autopsy, Shoe and Tire Prints
Excellent for Autopsy Handprints
Tireprint Comparison Standards
Finger and Palm Prints
Shoeprint Comparison Standards
Lifting Latent Shoeprints
Multipurpose
Handiprint material is a flexible, very slightly elastic plastic. It is white in color and has an exceptiionally smooth, adhesive coating. It has distinct advantages for handprinting over ink methods because it will often conform to the curves of the palm with minimal slippage.
Process:
Lightly dust palm side of hand with black fingerprint powder.
Separate release paper from handiprint lifter material (HLM). Spread fingers and press hand on adhesive side of HLM.
Lift hand. HLM will adhere. Press HLM in center of palm, along length of each finger, and around the sides of fingertips. Press around thumb as much as possible.
Lightly redust thumb. Roll thumb on the HLM as you would for an inked print. Cover HLM with a piece of clear plastic. Write identifying information on back of HLM.
White Adhesive Lifters With Matched Clear Polyester Covers
(Corresponds to SKU #2-3005, #2-3015 in printed catalog, )
Handiprint, white adhesive lifters, fingerprint, foot print, tireprint, post mortem print, handyprint, handi print, white adhesive, handy print
Tamper Evident Clear Evidence Bags 10" x 13" with Write-on Surface
Low Cost and High Quality
Closure shows "VOID" if disturbed
Self Sealing, Tamper and Tear Resistant
Chain of Custody Numbered Receipt and Bar Code
Bag Thickness 3 Mil
Quantity Discounts at 5 and 25 Packages
Free Sample Available Upon Request
100 Bags Per Package
Security bag, tamper evident, self seal
High Grade Portable Inking Foils 1" x 5" Per Pack
Excellent for Elimination Fingerprints
Used by Police and Investigators
Used for Child Fingerprint Programs
Acceptable to the FBI and other agencies. Made from high grade polyester film coated with a thin layer of fingerprint ink. To use, just peel back to expose the ink and roll the fingers. A fine layer of jet black fingerprint ink is transferred to the fingers. The fingers are rolled on a standard fingerprint card resulting in sharp prints. The foils can be reused. Hold down strips prevent the inking foils from sliding during use.
1" x 5" Foils in Packages of 2400 Also available in packs of 10.
inking foils, ink foil, ink foils, inking foil, 1-4250-10
Evidence Tube 1" X 8"
Sold in sets of 12
Quantity Discount at 5 Sets of 12 (60 Units)
Clear tube with Black Hexagonal cap to minimize rolling
Includes 1 1/2" closed cell ethafoam (closed cell foam) to protect end from needles or sharp knives
Biohazard label and sealed evidence label included
1" Diameter Holds 1-2 Syringes
Approximately 8 Inches
This clear tube with international biohazard markings is long enough to accommodate an extended syringe plunger. The clear tube allows for immediate recognition of contents and visible court presentation. The anti-roll feature reduces the risk of a needle stick by allowing for the use of a one-hand loading technique. The closed cell foam material in the bottom of the tube will enclose the sharp end of a hypodermic syringe. One hand loading.
Evidence tube, syringe tube, tube, tubes 1-5107
Handiprint System for Positive Identification - 9" x 13½" (Shoe size)
Use for Major Case Prints, Prints at Autopsy, Shoe and Tire Prints
Excellent for Autopsy Handprints
Tireprint Comparison Standards
Finger and Palm Prints
Shoeprint Comparison Standards
Lifting Latent Shoeprints
Multipurpose
Handiprint material is a flexible, very slightly elastic plastic. It is white in color and has an exceptiionally smooth, adhesive coating. It has distinct advantages for handprinting over ink methods because it will often conform to the curves of the palm with minimal slippage.
Process:
Lightly dust palm side of hand with black fingerprint powder.
Separate release paper from handiprint lifter material (HLM). Spread fingers and press hand on adhesive side of HLM.
Lift hand. HLM will adhere. Press HLM in center of palm, along length of each finger, and around the sides of fingertips. Press around thumb as much as possible.
Lightly redust thumb. Roll thumb on the HLM as you would for an inked print. Cover HLM with a piece of clear plastic. Write identifying information on back of HLM.
White Adhesive Lifters With Matched Clear Polyester Covers
(Corresponds to SKU #2-3160, #2-3170 in printed catalog,) Handiprint, white adhesive lifters, fingerprint, foot print, tireprint, post mortem print, handyprint, handi print, white adhesive, handy print
ID Print Inkless Fingerprint Pads
The I.D. Print ® system is a unique method of producing permanent, high-contrast black fingerprints without the mess of inks. Ideal for use at banks, retail establishments and in child identification programs, individuals simply press a finger onto an I.D. Print ® pad and then onto a special chemically treated card or label. Prints appear immediately, but leave no discoloration or residue on the fingers. The resultant prints dry instantly. The pads feature a unique ceramic insert, which prevents the inkless solution from evaporating over time and it assures that the inkless solution only coats the ridges of the fingers, producing perfect prints every time.
[ Fingerprint Pads, LE 64, LE 65, LE 62, 1-4191, 1-4192, 1007347, 1007349, ink pad)
Digit 10® - Inkless Fingerprint System
The Digit 10® is completely inkless and does not require special fingerprint cards. Unlike ink, the Digit 10 system is totally clean, and print cards can be handled immediately. Great for applicant prints, children ID programs, and even lower volume booking rooms.
Each Pad Produces Approximately 500 Ten-Print Cards
Digit 10® Inkless Fingerprint System
LE-10
Digit 10® Portable Kit
LE-10K
Plastic Briefcase
Replacement Kit
LE-110
1 Pad & 5 Developer Sheets
(Corresponds to SKU #1-4165, #1-4166 in printed catalog.)
Maximum Coverage Camel Hair Fingerprint Brush
For use with Regular (Non-Magnetic) Powders of All Colors
GOAT HAIR Brush Made from the Softest High Grade of Hair Available
Overall Length 7"
Bristle Length 2"
Comes in a Clear Plastic Tube with Cap